Dear Fitrx users you must know that machines do malfunction. And there is a way to troubleshoot them. Here we are about to go through some common problems encountered while using Fitrx.
This article is about Fitrx muscle massage gun troubleshooting. Go through this article and find solutions to your problem.
How to reset the Fitrx massage gun?
The reason you need to reset your massage gun is that it has stopped working. And there are several reasons for it stopping. Here are all those reasons that won’t let you reset:
- Overcharging the message gun
- Low battery
- Let it overheat
- Not using a compatible charger
- Exceeding the stall force (The stall force for Fitrx is 25 pounds)
- Overusing the massage gun
What is it that you need to do to reset; Some adjustments.
How to adjust a massage gun?
Firstly, turn off the device. Insert a paperclip or needle inside the reset button whilst restarting your device. Hold the power button for 10 seconds. Be careful to not break the needle you are using. This tweak is all that your gun needs.
Not being able to reset the massage gun means that it is starting to malfunction due to not following the precautionary measures.
What to do when the massage gun is overheated?
A feature of the Fitrx muscle massage gun is that it turns off on its own when in use for 15 minutes, but you can restart it.
If you are using the gun continuously without giving it a break it will start overheating. Leave it to take a rest for about 20-30 minutes. Wait for it to cool down and then use it.
Fitrx muscle massage gun troubleshooting, massage gun not turning on
If you are going through the same problem, it’s okay we got it resolved. The most common problem that is addressed in this case is that the massage gun won’t turn on but the time it is on charging.
Here is how you can troubleshoot it, take the rubber covering off of it. And at the bottom of the machine, there is a covering, detach it. “That thing is screwed”. Unscrew it, and lift the lid. You will find some loose wires.
Connect them to the battery but don’t secure the lid yet. Test whether the machine is turning on and then off correctly. If yes, you are good to go. If the machine turns on but won’t turn off, cross the wire paths and then connect to the battery. Check again and secure the covering.
What to do if the massage gun is still not turning on?
If you did take all the precautionary measures but still can’t start the gun then it means that:
- You are using a Defective or expired battery
- The battery is inserted upside down
- Or your massage gun is defective
In the former case, you need to replace the battery.
If battery is inserted upside down, flip it.
In the latter case, you need to check out the warranty of your massage gun. If the gun still has a warranty, contact the manufacturer and demand a replacement or refund.
Fitrx Massage Gun not Charging
Fitrx muscle massage gun not charging is a common issue but easy to solve. All you have to do is check the connectivity of the wires at the bottom of the machine. If you see that wires are connected, they might still be loose.
To check if they are just loose put pressure on the connected wires a bit, then connect the charger of the machine. If the LED starts flashing, you can now move on to solve this frayed connection.
Find something that will hold the wires in place like glue, just a drop of it is required, or a tape.
What are the precautionary measures while charging a massage gun?
Charge your Fitrx muscle massage gun with a USB-C cable that is compatible with it. If it is not try USB-A to USB-C cables too. Its charging time is about 2 to 3 hours. And its working time is about 1-2 hours.
Just make sure that it is charging properly by the flashing LED. Don’t overcharge it, when the LED turns solid red it is fully charged. Avoiding overcharging it, which can lead to battery problems.
How to Maintain Fitrx Massage Gun?
To prolong your massage guns life regularly clean and maintain your massage gun to ensure optimal performance.
You must follow the following instructions to lengthen its lifespan.
- Dry the surface after wiping it with a towel that is just slightly wet.
- Keep heat and water away from the gadget.
Conclusion
Undoubtedly massage gun is a fantastic tool for easing muscular tension and accelerating recovery. And unfortunately like any other electrical gadget a massage gun can also occasionally experiences problems.
Here in this article we will precisely discuss the causes of problems and give you precautionary measures. Some of the most typical Fitrx muscle massage gun troubleshooting techniques for issues like overheating, the gun not turning on, and charging problems have already been covered. These recommendations can frequently help you fix these problems quickly and easily.
Ultimately, you can maintain your Fitrx muscle massage gun in great condition and reap its rewards to the fullest for years to come with a little perseverance and the appropriate troubleshooting methods. Don’t be afraid to contact Fitrx customer service if you run into problems that need expert help and are persistent. Here’s to your ongoing health and fitness and happy massages!
Hello,
This is Safeer Ahmad founder of FitnessGearsHub. I’m an aspirant fitness freak, I commenced my career as a blogger and I opted for “gym and fitness” as my primary domain. As all fitness gears fancy me, I spend considerable time on research before buying one, I believe a health fanatic should be mindful of the product before making buying decision so I’ll try my level best to provide you ample information to buy one or maintain your gym equipment.